Microlife NC 200 non-contact digital thermometer

Non-contact thermometer NC 200

• Non-contact measurement
• Fast measurement in 3 seconds
• Clinically tested
• Recommended by doctors

The 3 in 1 thermometer allows multiple uses: measuring the temperature of the body, objects and surroundings

• Automatic start of body temperature measurement when the thermometer is placed at a distance of 5 cm from the body surface
• Smooth surface finish and hygienic measurement without touching the skin
• Blue guide phase for checking temperature sensing location
• Indicator for correct self-measurement of body temperature
• Silent Glow™ technology for fever alarm - red backlight of the display at a high body temperature above 37.4 °C
• Audible fever alarm at a temperature above 37.5 °C with the possibility to turn off the audio signal
• Large screen with backlight
• Date and time display
• Memory for the results of 30 measurements with date and time
• An automatic test each time it is switched on guarantees accurate measurements
• Automatic shutdown
• Power supply: 2x AAA 1.5V batteries (included in the package)
• Probe protective cover and protective housing
• 5 years warranty

This Microlife thermometer is a high quality product that uses the latest technology and has been clinically tested to international standards. It has been shown to be accurate and safe when used as directed.

Use

Multifunctional use (large measuring range)

This thermometer offers a wide range of measured temperatures from 0 to 100.0 °C. The device is recommended to be used to measure body temperature or to measure the surface temperature of the following objects:

• The surface temperature of milk in a bottle
• Bathing water surface temperature
• Ambient temperature

Technical documentation

• Body temperature measurement mode: 34.0-43 °C
• Object temperature measurement mode: 0 – 100.0 °C
• Resolution: 0.1 °C
• Accuracy of measurements (laboratory): ±0.2 °C, 35.0 – 42.0 °C
• Body temperature measurement mode: ±0.3 °C, 34.0 - 34.9 °C and 42.1 - 43.0 °C
• Object temperature measurement mode: ±1.0 °C, 0 - 100.0 °C
• Display: LCD, 4 digits + special icons

Acoustic signaling

• 1 short beep: the device is switched on and ready for measurement
• 1 long beep (1 second) : end of measurement if temperature is lower than 37.5 °C
• 10 short beeps: end of measurement if the temperature is equal to or higher than 37.5 °C
• 3 short beeps: in case of device failure

Memory: display of the last 30 measured values ​​with time and date recording in Memory mode.

Display backlight

• GREEN for 4 seconds: when the device is on
• GREEN for 5 seconds: at the end of the measurement, if the measured temperature is less than 37.5 °C
• RED for 5 seconds: at the end of the measurement, if the measured temperature is greater than or equal to 37.5 °C
• Automatic shutdown: about 1 minute after the last measurement

Power supply: 2 x 1.5 V alkaline batteries; size AAA

Battery life: approx. 2000 measurements (using new batteries)

Dimensions : 156.7 x 43 x 47 mm

Weight : 91.5g (with batteries), 68.5g (without batteries)

IP class: IP22

Estimated lifetime: 5 years or 12,000 measurements

guarantee

• 5 years accessories and consumables
• 2 AAA 1.5V batteries

Try other products from the Microlife brand, which are in the Thermometers, Medical Equipment and Medical Technology categories. The product has been rated by 10 customers and they recommend it 100%. The product is currently with 0% discount. The Microlife NC 200 non-contact digital thermometer is registered in the ŠUKL database under code P84327. If you are not sure that you have chosen this product, be inspired in the Non-contact Thermometers category.